Basic Info.
Type
Variable Area Flow Meter
Measuring Principle
Mechanics
Principle
Variable Area Type
Product Description
High-impact Polysulfone Plastic Flow Meter:
The Darhor EV Series variable area flow meters are constructed of high-impact polysulfone plastic to provide a low cost alternative for your flow monitoring requirements. These simple but rugged variable area flow meters contain a minimum number of moving parts, offering reliable and trouble-free flow measurement.
The Darhor EV Series variable area flow meters can be used in applications in which the temperature ranges from 32° F to 250° F (0° C to 121° C). These Darhor flow meters are pressure rated for 325 psi/22.4 bar maximum for liquids and for 125 psi/8.6 bar maximum for air and gases.
Variable area flow meters from the Darhor EV Series can be used for the flow measurement of oil, water, air, and compressed gases. Choose the port size and fitting material depending on your application. Five port sizes are available between 1½ To 2 inches with brass or PVC fittings. Six port sizes are available between ½ To 1 inch with brass, PVC, or stainless steel fittings.
Operating Principle of the Darhor EV Series Variable Area Flow Meters
A precision-molded, sharp-edged orifice forms an annular opening with the metering cone. Flow through the meter creates a pressure differential across the orifice, moving the piston against the spring in direct proportion to the rate of flow. The calibrated spring opposes flow in the forward direction. This spring decreases viscosity sensitivity and allows the flow meters to be used in any position, including inverted. The indicated flow rate is measured by viewing the red indicator line on the piston relative to the pre-calibrated numerical scale, mounted on the outer surface of the transparent body.
Features of the Darhor EV Series Variable Area Flow Meter
No special piping or flow straighteners needed
Easy to install in any position
No electrical connections
Direct reading indication
Relatively insensitive to shock and vibration
Fluid Flow Range female, female, female, female, socket weld
Media brass fitting brass fitting brass fitting brass fitting fitting
Manufactured by Darhor
Polysulfone plastic body, piston, and cone
½ To 2 inch ports
Accuracy within ± 5% full scale
325 psi (22 bar) for oil & water
Up to 250° F (121° C)
0.5-100 GPM (2-380 LPM) for oil & water
Standard calibration:
0.876 specific gravity for oil;
1.0 specific gravity for water
Applications: Water Cooling Systems, Chemical and Water Systems, Reverse Osmosis Systems
Address:
E-612 Cambridge Building, No. 789 Shenhua Road, Hangzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components
Management System Certification:
ISO 9000, ISO 9001
Company Introduction:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.